User Manual () Upgrade Instructions; 07/01/15; Download; Release Notes. Datasheet (). Datasheet () Upgrade Instructions; 08/31/15; Download. Don’t forget about our other Dlink DSLB info that you might be interested in. Login to Dlink DSLB Router · Change your Dlink DSLB IP Address. 5) The power light will first go red and the DSL light will flash. The DSL B comes with a lot of Manual Setup tick box and click the Setup Wizard button.
|Published (Last):||20 August 2010|
|PDF File Size:||3.67 Mb|
|ePub File Size:||7.3 Mb|
|Price:||Free* [*Free Regsitration Required]|
Click Reset Statistics to restore the values to zero and recount them. Update Firmware You must guarantee the update software is right and accurate. Page 59 High network traffic areas should select Short preamble type.
To save your current mqnual, click the Backup Settings button. Click Apply to save your changes. Enter the certificate name in the Certificate Name field. The preset IP address is Page 55 Import your existing certificate by pasting the certificate content into the Certificate field and paste the private key into the Private Key field.
Page 71 Click Apply to save and activate the filter. Click on Refresh to renew the page for dsk-2640b wireless stations. In this page, LocalCert means local certificates. To print the manual completely, please, download it. After update software, it is suggested to restore the router to the factory defaults and configure it again.
Internet time servers checkbox. Don’t show me this message again. Click on the Add button to add incoming filter settings. Specifies the timer of auto channelling. The Save button only saves the LAN configuration data, but does not apply the configuration.
Got it, continue to print. Enable to use a static IPv6 address. This is the same screen as seen in the Remotelog section under tools.
The router automatically recognizes the type of connection that is required. See the following figure: The port forwarding virtual server page is used to define applications that require special handling by DSL router. Quality Of Service This ensures that time sensitive data e. Select the desired values and click Apply to save the system log options.
Page 55 Click Next, and the right page appears. Click the IP Address button to define who is permitted access to local management features. After proper configuration, click Next. When satisfied mamual the settings click the Apply button. Tools Click the Admin button to change the routers account passwords.
Apply Click to save changes.
You can set 4 types of the WEP key. Network re-auth interval is the time in which another key needs to be dynamically issued. Then you can enter certificate name, paste certificate content.
Page 38 Web Configuration After proper configuration, click Next and the right page appears. Click Exit to close the window.
Dlink DSL-2640B User Manual
Dynamic Dns DNS address. Enter text from picture: You can select Display Level from the drop-down list. Click Add to add the static routing. Click Virtual Server, and the right page appears. For information regarding proper configuration, contact your ISP. Then decide if you will be using any features such as dial on demand, PPP IP extension, keep alive and then click Next.
D-LINK DSLB USER MANUAL Pdf Download.
Click the Update Software button once to upload the new image file. Tick the text boxes of the modulation types you want to enable. Test There are three buttons at the bottom of the page; Next Connection appears only if you have created more than one connectionTest and Test with OAM F4 which will allow you to retest if necessary. It is strictly forbidden to use other software for updates.
Page 80 To configure an individual interface, select the desired RIP version and operation, followed by selecting the Enabled checkbox for the interface.